Go to content Go to navigation Go to highlighted projects Go to contact
Surf to Summit Top Pattern - Out now!

Before New Year's...

17 December 2011, 14:26

… I want to make:

I’ve got to go into work on the 27th-29th, but I’ve still got a lot of days off to hole up in my sewing cave. Most years I end up making a coat over the Christmas break, but I don’t really have much need this year so I thought I’d focus my attentions elsewhere instead.

read more >>

How to finish a cowl neckline

4 November 2011, 15:12

As promised yesterday, here’s a really cool technique I used to sew the shoulder seams and get a clean finish at the neckline of my MyImage cowl tee (M1152 from the Fall/Winter 2011 issue) all in one go.

It’s a variation of “the burrito method”, and you can use it on any top where you’ve got a facing on one side, and a folded edge on the other. So it doesn’t have to be cowl necks, it’ll also work for surplice or wrap necklines with a self-facing, too!

This comes fairly early in the construction of your garment, but by this point you should have already sewn your facing (in this case, my back neck facing) to the body of the garment (the back here), right sides together. You should also stabilise your shoulder seams, either by using Vilene bias tape like I have, or with strips of knit interfacing or clear elastic – whatever your preferred method is!

In my example, I’ve got a back neck facing which is a separate piece, and a folded (ie: integrated) facing on the front.


Step 1. Pin the shoulder seams together from the shoulder edge to the back facing stitching line, right sides together. Keep the front facing and the back facing out flat (ie: don’t pin them!)

read more >>

The One Hour Cowl tee

3 November 2011, 14:02

First of all, thank you so much for all your comments and suggestions regarding my draped jacket! The consensus seems to be a) try it with skinny trousers, and b) shorten the sleeves at the very least, but I definitely need to take some time away from it before I can contemplate working on it again.

I think you can also predict what came next – a quick knit top! This top was particularly medicinal because last Saturday I’d already sewn up Holly’s maternity coat muslin, then done a bunch of overtime work from home, cut more insulation on the boat, and I found myself about 4pm with a totally frazzled brain and not quite sure what to do with myself.

So I went with my gut instinct, and started tracing the MyImage cowl tee (M1152 from the Fall/Winter 2011 issue)!

This fabric was a gift from Marie-Christine when we visited her in Toulouse at Easter. It’s a viscose(?) jersey printed (or actually, bleached, since the reverse is black!) to look like lace! I’m not a big “prints” person in general, but I’m such a sucker for a trompe l’oeil print, and you already know my love of lace!

There was only 1 metre of this, though, so it’s a good thing it has 2-way stretch since I had to fit the sleeves on the cross grain! If this was just a crosswise-stretch fabric I don’t think I would’ve been able to fit it in…

This pattern really is the essence of simplicity – there’s only three pattern pieces (four if you count the back facing, but I just used a rectangle of fabric instead), and the title of this post is no exaggeration – from tracing to cutting to sewing to wearing it took me only an hour! This really was just the pick-me-up I needed after the long-running draped suit project…

read more >>

The Draped jacket & skirt suit

31 October 2011, 14:15

I’m very happy to report that my draped suit (Burda September 2011 #126 and 127) is finally finished! It feels like I’ve been sewing this for f-o-r-e-v-e-r and I am thoroughly sick of it now!

If you recall, it’s a two-part suit, with a draped, collar-less jacket and a pleated pencil skirt:

I’ve been sewing both of the pieces in parallel, so I’ve finished them at the same time. I like a lot of aspects of this suit, but to be perfectly honest, I’m not totally in love with the overall resulting look.

The jacket and skirt together!

Things I really like: