Search Results for: diy boat skylight covers

DIY Boat Skylight covers

I’m very excited because this is the first opportunity I’ve had to crosspost anything between this sewing site, and our site for our boat, Hendrik!

We’ve got a total of six skylights on Hendrik – four flat metal ones in the front of the boat where we live, and two peaked, wooden framed ones in the back captains cabin which we rent out to our lovely lodgers. We’ve largely been able to keep our front skylights from leaking too badly, but the age and design of the ones in the back meant that they really needed some covers both to limit the drips and to protect the woodwork and the original 1930s patterned glass.


(this is the larger, saloon skylight)

So a few months ago I got some swatches from Pennine Outdoor to have a look at their tent fabrics, and decided that the “UV Treated Window Material” (P49) and “PVC Coated Polyester” (P9) would work best. Importantly, since I had the swatches I also tested to make sure I could sew through these on my regular domestic machine! I bought two metres of the green and one metre of the clear, which came to £23 including shipping (and this gave me plenty enough for these two skylights, and probably enough for at least one of our flat skylights).

Another skylight cover for the boat

You might mistake me for someone who actually enjoys sewing home dec for the sheer amount of it I’ve been doing this year. But considering the amount of time we’ve spent at home (ie: every waking moment for the past 8 months) it’s probably not surprising that we keep seeing ways to improve things.

The latest in my home improvements was sewing a new cover for the smaller, bedroom skylight in the back cabin. Unlike the skylights in the main part of the boat which are flat, these older covers over the original 1930s captains cabin are peaked, triangular wooden framed skylights which need custom shaping. The last one I made for this particular skylight was made in Jan 2011 so it nearly lasted ten years! But you’ll see further down how badly it needed replacing…

Boat skylight covers (again!)

Remember when I sewed some covers for the boat’s skylights back in January 2011? Frankly, I tried to put it out of my mind and certainly never have to make them again, but the larger of the two covers blew away (presumably – we’re not entirely sure what the ex-tenant did with it, grumble grumble), so I was forced to revisit these.

To me, home dec sewing is the worst – lots of boring rectangles and straight lines, measuring, unexciting fabrics, and then you don’t even get to wear it in the end! But as I discovered last time, outdoor home dec stuff is even worse!

To say I was dreading sewing this is a total understatement. But I sucked it up, brought out the remains of the waterproof vinyl from the dark hole I’d shoved it into, and then ordered another 1 metre of the green vinyl from Pennine Outdoor. Luckily, there was just enough clear vinyl leftover from before so it only cost me a tenner all in to complete this replacement one, even though the new green is a totally different shade to the previous one!