Search Results for: race tops and new patterns

Race tops and new patterns

It is an enigma that, while the overwhelming majority of 10k race participants are slim and svelte, race shirts given away to participants are always enormous!

I had two race shirts made out of the nice wicking polyester that were way too big to wear (hanging down to my mid-thigh! And I’m not exactly Tinkerbelle…) but too nice to let rot in my wardrobe, so I cut them up!

I used the same KnipMode pattern as before, but got lazy and just serged all the edges with my white woolly nylon thread and didn’t bother with the elastic. The armpits were a tad too high before, so I lowered those, but otherwise just approached this as a no-nonsense reconstruction to get some wear out of garments I previously wouldn’t touch.

The perfect pandemic trousers – for him!

I was encouraged by the effect that sewing for my mom had had on my own sewing mojo, so I decided to stick with the theme of sewing for others and I turned my attention to my husband instead.

I’d bought La Maison Victor‘s special Menswear issue back in 2018 (which I bought first in French when it was originally released, and then, later, again when it was finally released in English). There were so many good menswear patterns in this issue – lots of interesting and different (but still wearable!) designs, but I thought that the “Jeff Trousers” in particular would be perfect for J’s new work from home lifestyle.

How to add hand mitts or a turtleneck to the Winter Base Layer

I absolutely love the Winter Base Layer for cold weather exercising – I’ve both run and cycled in mine and I get so many compliments whenever I wear them! But with a few simple steps you can also change both the sleeves and neck to make it even more versatile.

Today I’ll be showing you how you can use the hand mitts from the Surf to Summit Top pattern instead of the included thumb cuffs, and also how to extend the neckline into a turtleneck (aka polo neck) if you’d prefer.

A charcoal and lime Jasper sweatshirt

For some reason, Paprika Patterns wasn’t entirely on my radar. I remember liking their skirt pattern when it was released, but I was super busy with my own patterns, and somehow I missed the release of their Jasper sweater/dress pattern entirely, until I stumbled upon it on my Twitter timeline, and thought WOW! And then immediately went and bought it.

As luck would have it, shortly after I bought the pattern I was gifted some amaaaaaaazing technical fabric from my friend with activewear industry connections – it’s charcoal jersey on one side, bonded with navy wicking fleece on the reverse. It’s super high quality with nice stretch and a great weight for keeping warm post-workout. I have also seen nothing like it on sale anywhere, sorry!

So I thought it’d be the perfect fabric and pattern combo to be my post-workout cooldown coverup. I’m a bit embarrassed to admit that I’ve been wearing the same ratty old red jacket after long runs and hard workouts, which I’d bought 10 years ago from a discount chain! Not really a great look when I wear all the crazy, wonderful workout gear underneath, so it was high time I upped my post-workout wardrobe game.


Seen here with my mesh-insertion leggings which I still love, but are too baggy for running in these days. Still great for cycling and casualwear though!

I thought an all-grey sweatshirt would be too boring for me, though, so I added a bunch of accents in lime green wicking jersey – I’d found some deep discounted gym tops in Pennsylvania in January so I bought the biggest I could find to get the most fabric possible, and paid only $5! The hems and bindings were particularly useful for inserting into seams, but for the large colourblocked areas I overlaid the green onto the thicker jersey/fleece first, since the green was considerably thinner.

I made a size 6 (B cup) of the Sweater length and the fit is great – I did narrow the sleeves by about 1.5cm further (and adjusted the cuff to match) but that was the only fit change I made. The length of everything is perfect for me.

The lower back colourblocking wasn’t originally intended – it’s not included in the pattern and only came about because I realised I did “a stupid” and accidentally cut the Back piece along the Lengthen/Shorten Line instead of the Sweater cut line, guh! So instead of cutting a whole new piece, I decided to play with the lower back and make it look intentional instead!

My teal mixed-print VNA Top and bonus booty shorts

I showed you a casual version of my new VNA Top pattern a few weeks ago, modeled by my athlete friend Anne, but one of the great things about this pattern is that it works equally well for both exercising and lounging about. Just change the fabrics and go up a size and it’s ready to throw on with jeans!

Since you’ve already seen one casual version, I wanted to show you my favourite workout version – actually, this might be my favourite workout top ever – I just love how the fabrics coordinate together!

If you’ve used any of my patterns before, you know how great they are for using up small pieces of fabric – because sportswear fabric can be expensive and I hate wasting anything, but also because it means you can coordinate tops and bottoms really easily! I made this VNA Top using a Spoonflower print I fell in love with, printed onto their Performance Knit base (though now that they’ve released their Performance Pique, I actually prefer that to the “knit”!), and when it finally arrived, I saw that the teal colour in it coordinated perfectly with the mint space dyed supplex I had leftover from my minty XYT Workout Top, but also with a bunch of mis-printed “Run to the Beat” technical tees I got given for refashioning. I couldn’t believe my luck!!

I cut the Upper Front in the Spoonflower print, the Lower Front & Back from the “hint of mint” supplex, and the Back and Bindings from the refashioned race tee. Three different fabrics in one top, but the shared teal colour mean they look great together!

Acid Trip Leggings and a Not-Sacrificial Sweatshirt

A few months ago Rosie (aka DIY Couture) gifted me this crazy, mind-melting lycra when she was moving house, saying it looked like something I’d like! It definitely falls into the “fabric I’d run in” category rather than my normal wardrobe, I’m sure you’ll agree, so I knew I’d make leggings from it!

As it happens, I needed to test out KwikSew 3636 for a leggings class I’ll be teaching soon (yay!) so I thought I’d whip up a quick pair with this lycra, which I’ve decided is an acid trip in lycra form. In reality like it’s even more loud than the print itself though – because it’s actually wet look, too!

I mean – who looked at this fabric and though “Nah, not enough. How can we make it CRAZIER? I know – add some wet look shimmer!”?

If you’re a regular reader, you know I don’t often sew with Big Four or envelope patterns much these days (and especially not for something I draft myself, like leggings) but credit where credit’s due – I was impressed by this pattern, actually! It’s a one-piece pattern with two different fit options – one at 100% of body measurement, and the other with negative ease. Clearly I went for the negative ease one!

I was also impressed that they finish the waistband in my preferred method, which I’ve never, ever seen on a pattern before!

Cutting out the pattern made for some stomach-churning moments – don’t stare directly at the fabric! Lucky for me I only had to cut out one piece, and the construction was so quick I was wearing them in well under an hour.

During the photoshoot, James asked why I was “going all Sasha Fierce”, ahahahah! Blame it on my acid leggings, I suppose!

Mocha running top with hand mitts

I don’t stop running just because it’s cold. Last winter I tended to run in jackets over top of my sleeveless vest tops, but my weight loss over the summer means that my running jackets are all a bit baggy and stuff in my pockets tends to bounce as a result. I’m also too cheap to spend £60+ each on several new jackets!

So I’ve been favouring running in the only two long sleeved running tops in my stash – the purple one I made last December, and also the one I won at Bacchus in September. Two tops is clearly not enough for the 5-6 times a week I’m running now in preparation for London Marathon in April, so I decided to make a clone of my purple running top, this time in mocha.

Again I used the Christine Jonson Travel Trio Three raglan top pattern, altered to have a half-height collar and my own addition of hand mitts on the sleeves. This now makes the fourth garment I’ve made from this pattern across three of the four views (I don’t really need the “Ruana” wrap shawl!) so I consider it to be very good value!

The fabric here is special Under Armor “Cold Gear” fabric Cidell very kindly picked up for me from a shop in Baltimore last year. This UACG fabric is a totally different weight and hand-feel to the green ones with a brushed black reverse I’ve used for leggings, though, even though both bear the “Cold Gear” name. At first I wasn’t sure what to do with it but now I see it’s pretty much perfect for tops as it’s lightweight, warm, silky, and just generally really high quality stuff. It figures I have no way of ever getting more! (Said shop closed down, too)

KnipMode and Burda June 2012

KnipMode June 2012

Let’s start off with the best from across both issues – this asymmetric, flounced top is just fantastic! I really like it paired with skinny jeans like they have here, too. It’s really important when you’re wearing volume up top to balance it with something slim below, or vice-versa!

In my mind, this A-line midi skirt was almost identical to one in last month’s Burda magazine that I really liked (and already traced, but when I’ll sew it is another matter!), but when I place the tech drawings side-by-side, they’re actually not as close as I remembered…

None of this combo of jacket, shell, or trousers is particularly earth-shattering, but I really like the look of pairing a cropped jacket (my forte) with a longer layer underneath. And beautiful, shimmering jewel tone solids are always a good choice!

This is a bumper issue for Plus sized patterns, with something like 15 on offer this month, but the one that really caught my eye is that they’ve released a favourite of mine from last summer in larger sizes now!! This is one of my favourite casual tops, despite the tunic-length, and I’m really chuffed to see it made more widely available now.

Bits and Pieces

Ok, so to take a brief break from reading material, I thought I should update you with what I’ve been up to in the sewing room…

Bridesmaids dresses

I had the first fitting of P’s muslin, and there are surprisingly little changes to be made – raising the neckline and armscye, pulling up the waistband by a centimetre, and that’s about it.

So I’m doing a second version of the bodice for her to try on this weekend, and then I unpick the skirt off that muslin and attach it to G’s bodice (the skirt is enormous and I didn’t have enough knit muslin for two!) and have her first fitting while I get down and dirty with the waistband pleating. I’m anticipating the pleating to be the most time-consuming part of both the dresses… (Earlier post about the dresses and colours here)

A spring dress

I finished a nice Springy version of BurdaStyle’s Heidi dress yesterday (finally!).

It was just waiting for a hem for nearly a week, which is a long time for me. It’s nice timing as Spring (or maybe even Summer!) arrived this weekend and it was gorgeous outside on deck with the barbecue going and everyone hopping from boat to boat. I’m hoping to do a photoshoot tonight now that we’ve got daylight for longer in the evenings…

Been making and opening…

Believe it or not, I’ve been doing an awful lot of resting and napping, but as long as I don’t spend too much time standing at the ironing board, I can usually get a fair bit of sewing done before I get too tired (though on the days I have to go into outpatients I just come home and collapse!).

Making!

Since I already had this KnipMode wrap blouse prepared as an activity pack, it seemed the ideal candidate to ease myself into my sewing room again. I’m waiting for my wigs to arrive from Hong Kong before I do the photoshoot, but here’s a teaser on Susan…

I realise I’m posting out of order here since I haven’t shown you all the fantastic August issue of KnipMode magzine yet, but let’s just say it’s so fan-tas-tic (terrible Dutch pun, uggggh) that I’ve already drafted this weekend bag pattern and have online shopping lists together to get all the haberdashery bits to complete it. I’m SO excited to try that vilene stuff that turns regular fabric into oilcloth, as my RTW bags just get so filthy so quickly!

And starting the long line of baby gifts (I have something like 5 or 6 friends due in August & September!!) is this baby blanket for our friend’s little baby, Grace. I did the embroidery (from Urban Threads) while I was in hospital, then used a large amount of the turquiose basketweave fabric (which was just screaming to be made into a blanket even before I made my duffle coat!), and finished it off with some red and white bias tape. How is it that no matter how much bias tape you make, you’ll always end up a little short? Or maybe it’s just me?