Bits & pieces

I haven’t got any finished projects or magazines to show you this week, so I thought it’d be a good opportunity to catch you up on all the smaller things I’ve been up to that maybe wouldn’t be enough for their own post…

The New Sewing Room

I know it feels like it’s taking forever (and believe me, it does to me, too!) but my new sewing room in the front of the boat is nearly done, so I’ve been spending a lot of time getting that ready to move into.

Most recently, I’ve been cutting, piecing, gluing and now sanding the beeeeeeeeautiful smoked oak mosaic panel flooring into place, which, while both expensive and time consuming, is something that makes me happy every time I see it.

The final remaining step is to put a few coats of oil on the flooring and tack the edge trim down and I’m ready to move in! And yes, at roughly 2m x 2m, it’s still smaller than most American closets! Our boat is heowge, but this particular room will be small, and hidden away, but it will be mine.

Seamwork articles

I’ve been a big fan of Seamwork magazine and a subscriber since Day One, and loads of you have written to tell me how much you enjoyed my first article, A Guide to Activewear Fabrics.

This month’s current issue is all about sewing knits (I know, right) and I’ve actually got TWO articles in it!

Weekend bits & pieces

Sorry for the stream of consciousness, but I’ve had a busy few days of sewing activity, but in more disjointed areas than any one common goal.

Burda and KnipMode magazines & PM3

The June editions of Burda & KnipMode arrived on the same day and made for a nice comparison. I loooooooved the May Burda, but the June one is way too summery for me, and I’m not really feeling it. I’ll review the KnipMode shortly, as soon as I can get the scanner going. I almost feel like I should start doing Burda magazine reviews since their online previews are getting more and more cumbersome to use, now that they’re eliminating the French site, the German does is a total PITA to view on mobile devices, and the English site only gets a third of the patterns a month after everyone else. But then again, so many other bloggers already do this so I don’t want to create a “New Vogue effect” where every sewing blog suddenly shows the same five pictures all at once.

What do you think? Is Burda niche enough that you want to see my picks like I do for Manequim and (soon to be much less frequently) KnipMode?

Also at the same time, my KnipMode renewal notice came through. I don’t want to renew, but I want to make sure I don’t need to do anything in order to cancel (ie: I don’t want it to renew me automatically). Could I pretty please send an image of the latter to a Dutch speaker just to confirm what I need to do? (Volunteers, please leave a comment) I don’t need a full translation, just someone to tell me whether I need to formally cancel or not.

My copy of Pattern Magic 3 (in English) also finally arrived, after the first copy got lost in the post from Amazon! There are some Must Sews in there (including one I’ve started drafting already) but also some hi-LAR-ious things in there. A review will be coming soon for this, too.

Underwear!

On Saturday, after my long run with friends, I made some new pants (underwear). As per usual, I used my TNT thong pattern, which originally came from a KnipMode magazine from 2007 or 2008.

Bits and Pieces

Ok, so to take a brief break from reading material, I thought I should update you with what I’ve been up to in the sewing room…

Bridesmaids dresses

I had the first fitting of P’s muslin, and there are surprisingly little changes to be made – raising the neckline and armscye, pulling up the waistband by a centimetre, and that’s about it.

So I’m doing a second version of the bodice for her to try on this weekend, and then I unpick the skirt off that muslin and attach it to G’s bodice (the skirt is enormous and I didn’t have enough knit muslin for two!) and have her first fitting while I get down and dirty with the waistband pleating. I’m anticipating the pleating to be the most time-consuming part of both the dresses… (Earlier post about the dresses and colours here)

A spring dress

I finished a nice Springy version of BurdaStyle’s Heidi dress yesterday (finally!).

It was just waiting for a hem for nearly a week, which is a long time for me. It’s nice timing as Spring (or maybe even Summer!) arrived this weekend and it was gorgeous outside on deck with the barbecue going and everyone hopping from boat to boat. I’m hoping to do a photoshoot tonight now that we’ve got daylight for longer in the evenings…

In progress bits

Contrary to the amount of time I’ve been spending behind a computer recently, I actually have been finding some time here and there to sew, too. It’s just, well, most of it is for my next pattern, which is going well, but is still at least three weeks off going live (sorry!). It turns out that, even though I can reuse some parts of the pattern between the men’s and women’s versions, there still an awful lot of extra work involved in creating two versions!

You might reasonably expect that I’d have to make twice as many samples, but there’s other added time involved with “invisible tasks” like walking seam lines and measuring finished garments, for instance. While both are made considerably easier done digitally, and even moreso if you’ve organised yourself a nice little Excel spreadsheet to do the heavy calculating and imperial converting, there’s still an awful lot of measuring to be done. But it gives me a little thrill when I can see my finished garment measurements vs body measurements equating to ease, down to 1/100ths of a mm!


This is just a small portion of my spreadsheet – the other bits gave too much away!

If you want to be the first to hear details of my new pattern, then now is an excellent time to sign up for my FehrTrade patterns mailing list, which which you’ll find at the bottom of my Shop front page. If you ticked “Yes” to marketing emails when grabbing my free Running Armband Pocket pattern, then you’re already on it. And I absolutely promise you that the email volume will be really low volume and only important stuff, like sneak previews and special voucher codes.

So on top of getting my next pattern ready to send to my two teams of pattern testers, organising athlete-models, and sewing up more samples, I’ve been spending my office hours working on an upcoming sewing book (not mine!) for a publisher, too. So it’s good practice in double-checking instructions and illustrations, but it is rather brain-taxing to be doing all day!

I’ve managed to squeeze in a few “Fun Sewing” projects, though, including a pair of leggings made from some luuuuuuuuuscious Funki Fabrics lycra (bought with my own money).

Little bits of sewing

I’ve come to that point near the end of the year where I want to gather together a bunch of little projects I’ve made recently, but yet didn’t quite seem big enough for their own post… You’ll see my traditional, year-end roundup tomorrow (I hope! I haven’t actually started it yet, eep!), but before then, let’s finish off the last little bits of the year…

Twin clutches

The most exciting of these are undoubtably the Cake Patterns Red Velvet Mini Clutches I made for James’s twin, teenaged nieces. They’ve pretty much only wanted cash or gift cards for a few years now, but this year I fancied giving them a little something extra to hold their gift.

The Cake Red Velvet Mini Clutch is a smaller version of the full pattern without the illustrated instructions, but on the plus side it’s free, super cute, and easy to whip up in a few hours with scraps. Here I used satin scraps leftover from my Matthew Williamson birthday dress and my swirl sheath dress and a bit of floral lining leftover from the former, too.

These are big enough to hold your average mobile phone, keys, lippy, and credit card, but not much else, but most of the times I want a little bag to match a dress this is all I really need to carry anyway. These were certainly one of those gifts I’d have liked to have kept for myself, especially since they match my dresses!

Bolster pillow covers

I’m totally less excited by home dec sewing, but we really wanted some bolster pillows for lounging in our big, new bedroom on the boat – now that I’m working from home, I especially need one under my knees while I work on my laptop! When we bought our bedding from IKEA, the duvet cover sets came with four pillowcases, and since we only use one regular pillow each, the others were just sat on a shelf.

My birthday floral Issy top

Happy 44th birthday to me!! It may be my fourth pandemic birthday today, but I’m still going strong!

A few weeks ago, it occurred to me that I had no idea what I wanted to sew for my birthday this year, so I took inspiration from my stash of patterns and pulled out Style Arc’s “Issy Knit Top”. It was released (and bought!) quite a few years ago but I never quite got around to making it but I still loved the style. It’s a long-sleeved (or sleeveless) knit top with gathered side seams, an asymmetric hem, and an interesting, asymmetric draped neckline, too.

At first, I made this up in a white tencel jersey, and I really liked the pattern, but the top didn’t feel special enough to be a Birthday Make (you’ll see this version in a later post). So I dug a bit further into my stash and noticed a beautiful, abstract floral jersey that I’d bought years ago from Fabrics Galore. It was 1.5m so plenty of fabric, plus it was soft and with a great drape, and I adored the print and colours, so it was perfect!

IWTV tribute crew shirt

It should come as no surprise to anyone who’s been following me on social media for the past few months that one of my first makes of the new year should somehow involve the “Interview with the Vampire” tv show (aka “the show so good I think it altered my brain chemistry”). I also spoke more about it in my end of year roundup if you want more explanation of just how good this show is, and how to watch it (short version: AMC or Amazon in most territories).

Anyway, in the official Behind the Scenes documentary, Sam Reid (the actor who plays Lestat) wears a slate blue teeshirt with a coffin drawing on the front, which I really liked, so I did a bit of investigating. Sam’s a massive Anne Rice nerd (to an encyclopedic degree!) but it turned out that this was the “crew shirt” for the show – a promo item made and distributed to cast and crew only. Usually these are pretty tacky affairs with just the show logo on a tee or trucker cap, but I really liked the subtlety of this one – it looks like it does have the show name on the sleeve and a bit of text on the back that can’t be read (my guess is maybe “Memory is a Monster”?), but mostly, I was into the coffin drawing. I did some cursory searches on eBay but with NDAs these days, I didn’t really expect to find anyone selling theirs. So if I wanted one, I’d have to make one myself!

Happy 2023! (Year in Review)

For the past 15(!) years I’ve posted my year in review on 1 January, but not this year. I lost my sewjo around the end of September so I didn’t really have much to blog about. I waited for it to reappear (as I learned a long time ago there’s no point in trying to force it) and prepped a few projects, tidied a bit, planned a bit, and then fell into a massive “Interview with the Vampire” fandom hole (more on that later), and generally was happier in October and November than I’ve been in a long time (completely unrelated to the sewing) but that’s not the reason this post is late.

This post is late because, despite my best efforts (cycling to/from, FFP3 masking indoors with my CO2 monitor and otherwise staying outdoors) I caught a virus of some sort at the office christmas party which left me practically bed-bound with post viral fatigue for 4+ full weeks (no, not Covid, not flu, not RSV, not anything they swabbed for at haematology, but thankfully not EBV either). Like, 21+ hours a day in bed, and if I sat up for more than 15min to eat or drink, I’d have to lie flat for another hour. So sitting up to type was impossible, and I wrote this in pieces on my phone when I could, not being able to put it all together until I started improving a little bit in the past few days.

So apologies that it’s late, and for the blog silence for the past few months, but hey, 2023 can only get better from this dismal start, right?? Without further ado, let’s have a look back at 2022…

Completing the Alpine Cycling Set (& 100 miles!)

When I sewed myself the Alpine cycling kit last summer, I didn’t make a sports bra to go along with the Surf to Summit Top jersey and the Rouleur Leggings bib shorts, even though I’d done so for my previous two cycling sets (rainbow in 2019 and Tokyo-inspired in 2020). This was because I didn’t really think I’d have enough fabric left as I knew I wanted to make Tenacity Shorts and a Versatili-Tank with it too, but also because I figured I had enough sports bras and it didn’t really matter.

But apparently I do care, because in the months of cycling in the kit since then (99% of which was on Zwift!), it kinda bugged me that I didn’t have a matching bra – petty, I know, but easily fixable! So once I decided that I’d be cycling RideLondon’s 100 miler in this kit, I pulled out the leftover scraps to see if I could piece together a sports bras from the bits of fabric and upcycled race tees. And the answer was “just barely”!

A mesh black lingerie set

If it ain’t broke, don’t fix it! Yes, this is a very similar set to the dotty one I shared on Friday, but I liked that one so much I wanted more in my lingerie drawer.

Earlier, I’d made the plain View 1 of the Sophie Hines Axis Tank pattern but this time around I wanted to make View 2 which has the seamed sides and back. I’ve seen loads of great examples of this pattern using different fabrics and it was the real reason I bought it!